LONG COMMUNICATIONS
DUNKINEELY - CO. DONEGAL - IRELAND
TEL. 074 973 7152 - From UK: 00 353 74 973 7152
LONG COMMUNICATIONS

SECOND HAND ICOM 718 TRANSCEIVER

<p class="western" style="margin-bottom: 0cm">
	The IC-718 features a clean 100-Watts transmitter for SSB and CW and a built in electronic keyer for CW and 40 watts output on AM. As you would expect, an all mode, general coverage receiver is built in and covers 30kHz -29.999 MHz. A newly designed PLL circuit has been adopted to improve Signal / Noise ratio characteristics. This combined with a 4-element system mixer ensures truly superior performance.<br />
	<br />
	The IC-718 is equipped with a minimum number of switches and controls for ease of use. For example, the 10-key pad on the front panel allows you to directly enter an operating frequency, or access a memory channel. All popular operating modes are offered; USB, LSB, CW, RTTY (FSK) and AM, in addition there is a level adjustable noise blanker, a variety of scanning functions as well as a hand microphone and electronic keyer as standard.<br />
	<br />
	The auto tuning steps function speeds up tuning through the bands but only activates when turning the dial quickly. The band stacking register ensures that you always return to the last used frequency when changing bands.<br />
	<br />
	To reject interference, the IC-718 has an IF shift function which shifts the centre frequency of the IF passband electronically to reduce nearby interference. A microphone compressor ensures really punchy audio to get your signal through in difficult operating conditions. The compression level is easily adjustable from the front panel. This function really makes a difference when propagation conditions are poor.<br />
	RF gain control is combined with the squelch control. The RF gain adjusts minimum response receiver gain and improves reception on the noisier bands. An electronic keyer with a variable dot/dash ratio control is built in. The CW pitch is variable from 300-900 Hz and the keyer speed goes up to 60 wpm! Full break in capability is available with an adjustable break-in delay.<br />
	<br />
	The IC-718 has a total of 101 memory channels, which stores operating frequency and mode. The IC-718 has a number of options available to enhance the model including UT-106 DSP unit to further improve receiver performance, CR-338 High Stability Crystal improve the frequency stability to within . 5ppm, UT-102 voice synthesiser, which gives the IC-718 a clear electronically generated voice etc.</p>
<div aria-expanded="true" class="panel-collapse collapse in" id="collapse1" style="">
	<div class="panel-body">
		<ul>
			<li class="bulletedListContent">
				Entry level HF base station transceiver</li>
			<li class="bulletedListContent">
				Multi mode operation (USB, LSB, CW, RTTY(FSK), AM)</li>
			<li class="bulletedListContent">
				101 memory channels with alphanumeric name capability</li>
			<li class="bulletedListContent">
				Front mounted speaker for clear audio</li>
			<li class="bulletedListContent">
				Newly designed PLL circuit improves Signal/Noise ratio characteristics</li>
			<li class="bulletedListContent">
				Dimensions : 240(W) x 95(H) x 239 (D) mm</li>
			<li class="bulletedListContent">
				Weight : 3.8kg</li>
		</ul>
	</div>
</div>
<p class="western" style="margin-bottom: 0cm">
	&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &euro;575</p>
<p class="western" style="margin-bottom: 0cm">
	&nbsp;</p>
<p>
	&nbsp;</p>

The IC-718 features a clean 100-Watts transmitter for SSB and CW and a built in electronic keyer for CW and 40 watts output on AM. As you would expect, an all mode, general coverage receiver is built in and covers 30kHz -29.999 MHz. A newly designed PLL circuit has been adopted to improve Signal / Noise ratio characteristics. This combined with a 4-element system mixer ensures truly superior performance.

The IC-718 is equipped with a minimum number of switches and controls for ease of use. For example, the 10-key pad on the front panel allows you to directly enter an operating frequency, or access a memory channel. All popular operating modes are offered; USB, LSB, CW, RTTY (FSK) and AM, in addition there is a level adjustable noise blanker, a variety of scanning functions as well as a hand microphone and electronic keyer as standard.

The auto tuning steps function speeds up tuning through the bands but only activates when turning the dial quickly. The band stacking register ensures that you always return to the last used frequency when changing bands.

To reject interference, the IC-718 has an IF shift function which shifts the centre frequency of the IF passband electronically to reduce nearby interference. A microphone compressor ensures really punchy audio to get your signal through in difficult operating conditions. The compression level is easily adjustable from the front panel. This function really makes a difference when propagation conditions are poor.
RF gain control is combined with the squelch control. The RF gain adjusts minimum response receiver gain and improves reception on the noisier bands. An electronic keyer with a variable dot/dash ratio control is built in. The CW pitch is variable from 300-900 Hz and the keyer speed goes up to 60 wpm! Full break in capability is available with an adjustable break-in delay.

The IC-718 has a total of 101 memory channels, which stores operating frequency and mode. The IC-718 has a number of options available to enhance the model including UT-106 DSP unit to further improve receiver performance, CR-338 High Stability Crystal improve the frequency stability to within . 5ppm, UT-102 voice synthesiser, which gives the IC-718 a clear electronically generated voice etc.

  • Entry level HF base station transceiver
  • Multi mode operation (USB, LSB, CW, RTTY(FSK), AM)
  • 101 memory channels with alphanumeric name capability
  • Front mounted speaker for clear audio
  • Newly designed PLL circuit improves Signal/Noise ratio characteristics
  • Dimensions : 240(W) x 95(H) x 239 (D) mm
  • Weight : 3.8kg

          €575

 

 




How to Order?

Ordering from us is easy - just call 074-9737152 Tuesday, Thursday or Friday, 9.30-5.00 pm. It only takes a few minutes to process your order, and we can help you choose the right products for your purposes. For next day delivery, please call before 1.00 pm.

How to Pay?

We accept credit cards and debit cards over the phone. We accept PayPal and Bank Transfers by email.